- Dramatically reduces energy
consumption by as much as 30-50% - Uses Solar heat to displace electricity
used in the cooling process thru
Solar Vacuum Tube Collectors - Coolest, greenest & lowest method to
cool your homes, offices & business
establishments - Significantly reduces C02 emissions,
a major cause of global warming - 1.5tonner unit saves approx. 11.89
tons of C02 emissions per year - Using 407c ozone friendly refrigerant
- 5-year warranty on all parts
- CE, UL, CSA NATL/C certified & duly
exempted by DOE to PNS 395-1:
1995; Highest EER of 26 - Currently being used in U.S. Navy’s
Housing Facility, Mt. Alverina Hospital
in Singapore & has reached
Portugal, Pakistan, Togo West Africa
& many more - Return of Investment in 12-24 months
only - Units on promo, avail of big discounts
Solar assisted airconditioner
How does a solar air conditioner work?
The Sedna Aire Solar Absorption Air Conditioning system is a system that utilizes the sun as
a heat source to assist the energy needed to drive the cooling process of a typical air
conditioning system which in turn reduces the electrical consumption required to run the
compressor.
The Sedna Aire System is similar to a regular air conditioning system in that the refrigeration
takes place by evaporating liquid with a very low boiling point. In both cases, when a liquid
evaporates or boils, it takes some heat away with it, and can continue to do so either until the
liquid is all boiled, or until everything has become so cold that the sub-zero boiling point has
been reached. The difference between the two is how the gas is changed back into a liquid
so that it may be used again. A regular air conditioning system uses a compressor to
increase the pressure on the gas, forcing it to become a liquid again through the use of the
condenser coil. The change of state of the refrigerant, starts to take place approximately
2/3rd's of the way down the condenser.
The Sedna Aire Solar Absorption Air Conditioning System uses a different method. It uses
the solar heat from the sun to superheat the refrigerant which enables the refrigerant to
begin changing state at the top 2/3rd's of the condenser coil. By using this method it reduces
the superheat of compression required to achieve the cooling process in the conventional
cooling systems as well as utilizing more of the condenser cooling face of the coil. The
conventional air conditioning system is only able to change a portion of the gas into a liquid
state so as when the refrigerant enters into the metering device it is a saturated vapor. The
Sedna Aire process allows more of the refrigerant to change state back into a liquid faster as
well as allowing the transformation of more liquid into the metering device.
PRINCIPLES
Sedna Aire Solar Absorption Air Conditioning uses the sun as a source of heat to provide the
energy needed to drive the cooling process. This process is very efficient, since most of the
condenser and evaporator coil face is being utilized.
The basic thermodynamic process is not a conventional thermodynamic cooling process
based on Charles Law. Instead, it is based on evaporation, carrying heat, in the form of
fast-moving (hot) molecules from one material to another material that preferentially absorbs
hot molecules.
The Sedna Aire Solar Absorption Air Conditioning system cools by evaporating liquid R407c.
The Solar Absorption medium inside the
Solar panel acts as a storage tank to maintain the required temperatures needed for the
cooling process. With the Solar Absorption tank, the cooling process is maintained for
approximately 96 hours without the need of the Sun's heat. The heated medium also acts as
an absorbent to the refrigerant through the solar panel process. With this process, Sedna
Aire maintains its energy required for the cooling of the controlled space.
The Sedna Aire Solar Absorption Air Conditioning system is a system that utilizes the sun as
a heat source to assist the energy needed to drive the cooling process of a typical air
conditioning system which in turn reduces the electrical consumption required to run the
compressor.
The Sedna Aire System is similar to a regular air conditioning system in that the refrigeration
takes place by evaporating liquid with a very low boiling point. In both cases, when a liquid
evaporates or boils, it takes some heat away with it, and can continue to do so either until the
liquid is all boiled, or until everything has become so cold that the sub-zero boiling point has
been reached. The difference between the two is how the gas is changed back into a liquid
so that it may be used again. A regular air conditioning system uses a compressor to
increase the pressure on the gas, forcing it to become a liquid again through the use of the
condenser coil. The change of state of the refrigerant, starts to take place approximately
2/3rd's of the way down the condenser.
The Sedna Aire Solar Absorption Air Conditioning System uses a different method. It uses
the solar heat from the sun to superheat the refrigerant which enables the refrigerant to
begin changing state at the top 2/3rd's of the condenser coil. By using this method it reduces
the superheat of compression required to achieve the cooling process in the conventional
cooling systems as well as utilizing more of the condenser cooling face of the coil. The
conventional air conditioning system is only able to change a portion of the gas into a liquid
state so as when the refrigerant enters into the metering device it is a saturated vapor. The
Sedna Aire process allows more of the refrigerant to change state back into a liquid faster as
well as allowing the transformation of more liquid into the metering device.
PRINCIPLES
Sedna Aire Solar Absorption Air Conditioning uses the sun as a source of heat to provide the
energy needed to drive the cooling process. This process is very efficient, since most of the
condenser and evaporator coil face is being utilized.
The basic thermodynamic process is not a conventional thermodynamic cooling process
based on Charles Law. Instead, it is based on evaporation, carrying heat, in the form of
fast-moving (hot) molecules from one material to another material that preferentially absorbs
hot molecules.
The Sedna Aire Solar Absorption Air Conditioning system cools by evaporating liquid R407c.
The Solar Absorption medium inside the
Solar panel acts as a storage tank to maintain the required temperatures needed for the
cooling process. With the Solar Absorption tank, the cooling process is maintained for
approximately 96 hours without the need of the Sun's heat. The heated medium also acts as
an absorbent to the refrigerant through the solar panel process. With this process, Sedna
Aire maintains its energy required for the cooling of the controlled space.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |  |  |  |
For Brochure downloads please click on the following links:
2 . Centra Heat Pump
3 . Concealed Ducted
4 . Floor Ceiling
5 . Floor Standing
6 . Mini Split